|
|||
|
|||
|
|
Monday, 22 March
Pre-Symposium Networking Activities
9:00 a.m. 2:00 p.m. Golf Scramble, Medal of Honor Golf Course
5:00 p.m. 6:30 p.m. Early Registration The Clubs at Quantico Lobby
6:30 p.m. 8:30 p.m. Opening Evening Reception
Tuesday, 23 March
7:00 a.m. 8:00 a.m. Registration and Continental Breakfast
8:00 a.m. Welcome and Opening Remarks Richard B.
Jarman,
President & CEO, NCMS
8:10 a.m.
Commercial Technologies for Maintenance Activities (CTMA)
Overview,
Greg Kilchenstein, Office of Assistant Deputy Under Secretary of
Defense, (Maintenance Policy & Programs)
8:30 a.m.
Major General Nickolas G. Justice, U.S. Army Research and Engineering
Command, (RDECOM)
9:15 a.m. BREAK
9:30 a.m.
Mr. Gary Motsek, Assistant Deputy Under Secretary of
Defense
(Maintenance Policy & Programs) Acting
10:00 a.m. Mrs. Debra Tune (SES), Deputy Assistant Secretary of the Air
Force for
Logistics, Office of the Secretary of the Air Force
10:30 a.m. BREAK
10:45 a.m.
Mr. Michael Madden (SES), Executive Deputy, Marine Corps
Logistics Command
11:15 a.m.
Rear Admiral Thomas Moore, Deputy Director for Fleet
Readiness, Chief
of Naval Operations
11:45 a.m. LUNCH
Lunch Speaker Voice from the Field and the Reality of Maintenance in
Theater, Todd Eggler, International Man of Maintenance
Project Showcases
1:00 p.m. Strategic Perspectives on Depot Maintenance Technology
Insertion
Senior DoD logisticians will provide strategic perspectives on depot maintenance technology insertion (TI). Panel members will discuss the recent effort by the Assistant Deputy Under Secretary of Defense (Maintenance) and the Services to embark on a requirements-driven approach for identifying and funding TI solutions to depot maintenance problems. They will provide the view from the top as they answer questions related to the Service-specific impact of a requirements-driven approach to TI while emphasizing the need for joint collaboration through the process. Audience participation is encouraged.
Moderator RDML (Ret.) Steve Heilman, LMI
Panel Members:
RDML Thomas Moore, Deputy Director for Fleet Readiness, Chief of Naval Operations
Ms. Sharon Smoot (SES), Acting Executive Director for Logistics, Maintenance and Industrial Operations, Naval Sea Systems Command
Mr. Michael Madden (SES), Executive Deputy, Marine Corps Logistics Command
Mrs. Debra Tune (SES), Deputy Assistant Secretary of the Air Force for Logistics, Office of the Secretary of the Air Force
3:15 p.m. BREAK
3:30 p.m.
Fuel Leak Technology,
Doug Dynes, Pentagon SAF IEL, Michael Evans, Executive
Vice President, Aerowing
4:00 p.m. Laser Stripping Technology,
John Incata, System Operator, FRC
East;
Lee Nathan, Mechanical Engineer, Naval Undersea Warfare
Center Keyport
4:30 p.m. Adjourn
5:00 p.m. 7:30 p.m. Evening Tabletop Reception The Clubs at
Quantico
Wednesday, 24 March
7:00 - 8:00 a.m. Registration and Continental Breakfast
8:00 a.m.
Requirements and Solution-Based Technology Insertion A
Balanced
Investment Portfolio Approach, Thomas T. Gorman,
JG-DM, Secretariat
8:45 a.m.
Insertion Requirements; Moderator RDML (Ret.) Steve Heilman,
LMI, What IS and What IS NOT a Requirement? (This workshop will
identify
what the process is for generating and budgeting for a
Requirement.)
10:15 a.m. BREAK
Project Tracks
(Track Sessions will be held concurrently)
Coatings/Corrosion Control
10:30 a.m.
Laser Cleaning & Surface Prep for Sustainment Repairs,
Tim Niemeier,
Vice President, Adapt Laser Systems
10:50 a.m.
Practical Cold Spray, Wally Birtch, Senior Application & Development
Engineer,
Centerline (Windsor) Ltd; Matt Trexler,
Army Research Laboratory
11:10 a.m.
Laser Additive Manufacturing as Repair for Titanium
Compressor Blades,
Dr. Shawn Kelly, Research Associate, iMAST, Applied Research
Laboratory, Penn State University
11:30 a.m.
Repair of Submarine Shafts Using Laser Cladding, Dr. Todd
Palmer,
Research Associate, iMAST, Applied Research Laboratory,
Penn State University
Inspection/Test
10:30 a.m.
Automated Process & Inspection Guide (AP&IG), Randy Kirk,
President & CEO, Aspire Solutions, Inc.
10:50 a.m.
CH-53 Readiness & Reliability II, Steve Husak, Business
Development,
REI Systems Inc.
11:10 a.m.
Enhanced Wiring Integrity Systems (EWIS) II, Olga Keegan, FRC
Southwest, Commodore Wing (SH-60); Shawn Lamper, Program
Manager, Eclypse International
11:30 a.m.
Night Vision Devices (AIMS), Rick Foley, Chief, New
Technology R&D
Division, Tobyhanna Army Depot
Environmental
10:30 a.m.
Erosion/Corrosion Resistance Coatings ESTCP Project, Jon Cheverie,
Projects, Business Development, MDS-PRAD Technologies Corporation
10:50 a.m.
In-Situ Coating Analysis for Hazardous Metals, Mitchell
Vickers,
Engineering Technician, Norfolk Naval Shipyard
11:10 a.m.
Fast Field Fluid Assessment Support Tools (3 FAST), Mitch Shikowitz,
Business Development Manager, QinetiQ-NA, Spectro, Inc; Edgardo
Guevara, Lubricant Program Manager, Military Sealift Command
11:30 a.m.
Improved Stealth and Lower Cost Operations for U.S. Naval
Ships Using
High-Performance Cordage Deck Edge Netting, Dr. John Puglia, Director
of Human and Systems Technology, QinetiQ North America
Workload/Workforce/Material Management
10:30 a.m.
Legacy Lifecycle Data Management, Nainesh Rathod, President &
CEO,
Imaginestics
10:50 a.m.
Sense & Respond LAV III, John McGinnis, Vice President, Solidica, Inc.;
Bill Black, President, Black & Rossi, LLC
11:10 a.m.
Centralized Fleet Automated Management System (CFAMS),
Peter Fausel, Executive Vice President Sales & Marketing,
I.D. Systems, Inc.
11:30 a.m.
Item Unique Identifier (IUID) Markings for Legacy Parts, Nainesh Rathod,
President & CEO, Imaginestics
1200 LUNCH
Metal Working
1:20 p.m.
Trivalent Chrome Plating II, Tim Hall, Principal Scientist,
Faraday
Technologies; Bruce Griffin, Associate Technical Fellow,
Boeing Corporation
1:40 p.m.
Advanced Tooling for Nickel Plating, George Cushnie, Vice
President,
Advanced Tooling Corporation
2:00 p.m.
Metal Finishing Development, Lindsay Hampton, Chemist, Corpus
Christi
Army Depot; George Cushnie, Vice President, Advanced
Tooling Corporation
2:20 p.m.
Optical Generation of 3D Models for Computer-Aided
Manufacturing
(OptiCAM) IV, Ali Farsaie, President, Spatial Integrated Systems, Inc.
Inspection/Test (continued)
1:20 p.m. Common Automatic Test Equipment (ATE),
Richard Freeman,
Business
Development, Lockheed Martin Simulation, Training & Support;
Hugh Pritchett, President, Analysis, Integration & Design, Inc.
Manufacturing
1:40 p.m.
Volumetric Accuracy for Large Machine Tools, Ron Hicks,
Director,
API
Technical
Services, Automated Precision, Inc.
2:00 p.m.
Rapid Access to Readiness Essential (RARE) Parts through
Rapid Manufacturing & Repair Technologies, Christopher Robinson,
Non-Metallics Manufacturing Lead and Autonomous Vehicles
Engineering Lead, Naval Air Warfare Center Weapons Division,
China Lake; Rex Brown, LLC Mechanical Principal Engineer,
Honeywell FM&T; Greg Morris, CEO/COO, Morris Technologies, Inc.
2:20 p.m.
General Emulation of Microcircuits (GEM) Overcoming the
Microcircuit
Obsolescence Issue, Fred Shope,
Research Analyst, DLA DSCC
GEM Program Office
Composites
1:20 p.m.
Heat Transfer Classification for Production Tooling &
Composite Repair,
Tom Rose, President, AvPro, Inc.
1:40 p.m.
Inspection & Repair Preparation Cell (IRPC), Frank
Elliott, Advanced
Initiatives Coordinator, GFM GmbH
2:00 p.m.
Use of Microwires for Internal Bondline or Thick Laminate
Temperature
Measurements, Tom Rose, President, AvPro, Inc.
2:20 p.m.
Introduction to Digitizing and Shearography Technology, K.R.
Srinivas,
Director of North American Operations, Steinbichler Vision Systems
Workload/Workforce/Material Management (continued)
1:20 p.m.
Smart Machines II, P.J. Sturdevant, Freedom Product Manager,
MAG Industries
1:40 p.m.
Stop Training; Start Learning, Dr. Hossein Nivi, President &
CEO,
Pendaran, Inc.
2:00 p.m.
Making Sense of CBM Data Using Advanced Analytics, Joanne Zuzelski,
Director of Partner Relations, Enterprise Computing & Analytics,
Altair Engineering
2:20 p.m.
Lose the weight! Automated Welding of Tubular Metals Using
Deformation Resistance Welding, Jim Richter, Director, Gravikor, Inc.
2:40 p.m. BREAK
3:00 p.m. Requirements-Driven Depot Maintenance Technology Insertion:
Practical Perspectives
Members of the JTEG will provide practical perspectives on requirements-based depot maintenance technology insertion (TI). Representing their Services logistics headquarters, this panel of subject matter experts provides the link to the shop floor by continuously working to facilitate the introduction of new and emerging technologies, processes, and equipment into the depot maintenance community. They will answer questions that focus on the benefits of Joint Service collaboration and the importance of moving the maintenance community toward a unified, requirements-driven TI approach. Audience participation is encouraged.
Moderator Steve Siens, JDMAG/JTEG
Panel Members:Greg Kilchenstein, OADUSD (MP&P)
Tom Spitler, Air Force Materiel Command
Kurt Doehnert, Naval Sea Systems Command
Greg Russell, Marine Corps Logistics Bases
Gerry Bates, Army Materiel Command
4:30 p.m. Adjourn
© 2010