|
 The
symposium presentations are available on this site for attendees. They are
in Adobe PDF format. You
will need the free Adobe Acrobat Reader version 5.0 to view the files. It
can be downloaded from Adobe's
web site.
The symposium attendee list is also available in PDF format.
Attendee List
Symposium Presentations
General Session - Roles of Sponsoring Organizations
Introductions and
Symposium Objectives
Chuck Ryan, NCMS Executive Director, CTMA Program
Commercial Technologies for Maintenance Activities
Walter Atchley (Office of the Secretary of Defense)
Joint Technology Exchange Group
Mr. Thomas Gorman(JDMAG/MAW)
Joint Council on Aging Aircraft
Col. Michael Carpenter (USAF/Joint Council on Aging Aircraft)
DoD Sustainment and Readiness Subpanel
Mr. Rafael Reed (DoD Sustainment and Readiness Subpanel Chair)
General Session - Needs of the Defense Community
Aircraft
Colonel Michael Carpenter (USAF)
Surface Combatants
Rodger Vandveer (COMNAVSURFLANT, Technical Deputy for Combat Systems
and C4I)
Submarine Maintenance
and REPTECH
Captain Charles Doty (Commander Submarine Force US Atlantic
Fleet,(COMSUBLANT) (N4 - Maintenance & Logistics)
Ground Vehicles
Lieutenant General Charles Mahan, Jr. (Deputy Chief of Staff, G-4,
Department of the Army)
Ongoing Project Activities
Track 1 – Metals
Near Dry Machining
of Aluminum
Alex Stoll (Ford Motor Co)
Laser
Engineered Net ShapingTM
Dave Keicher (Optomec)
Next Generation
Inspection System
Jeff Calkins (Manufacturing Resources Inc)
Blade Tip
Repair (FY96 445)
Rafael Reed (US Air Force)
Thermal Spray
Booth Equivalency Unit
Walter Riggs (TubalCain)
Laser Peening
for Aircraft Maintenance and Manufacture
Mike Hill (Univ. of California - Davis)
Ultrasonic
Consolidation for Metal Part Fabrication
Bob Badgett (Solidica)
Surface
Preparation Improvement at MCB Albany
Charlie Tricou (Penn State University)
Submarine
Vertical Launch System Laser Cladding
Pat Bergan (NUWC, Keyport)
Evaluation and
Repair of Marine Corps Light Armored Vehicle LAV-25
Eric Whitney (Penn State University)
Retrograde Part
Identification in Harsh Environments
Gary Burkart (NCMS)
Natural Gas
Engine Drive Air Compressors
Mike Lin (US Army)
Uniform
Cannon Reshaping
Walter Roy (US Army)
Aircraft
Carrier Catapult Trough Covers Laser Cladding
Paul Blomquist (Penn State University)
NUWC
Keyport Laser Cladding Facility
Pat Bergan (US Navy)
Ongoing Project Activities
Track 2 – Non-Metals
Army Composites Manufacturing
Technology Objectives
Walter Roy (US Army)
Materials
State Management for Composite Parts
Bill Wright (AvPro Corp)
Laser Paint Stripping of Helicopter
Blades at NADEP Cherry Point
Sean Krieger (Penn State University)
Air Force Olympic Skeleton
Sled
Larry
Coulter (US Air Force)
Next
Generation Transparency Program
Mike Gran (US Air Force)
Appliqué
Coatings on Naval Aircraft: Database Development and Removal Technologies
Dan Metrey (Penn State University)
Evaluation
Of Cavitation Damage Resistant Coatings For Use On Naval Structures
Dan Metrey (Penn State University)
Repair
for Non-Aerospace Composite Structures
Eric Greene (Structural Composites)
Composites
at the Oklahoma City Air Logistics Center
Edwin Kincaid (OC-ALC)
Air Force Advanced Composite Office
- Overview
Larry Coulter (US Air Force)
Composites
Supportability IPT
Mark
Forte (US Air Force)
Bonded
Repair Capability Enhancements - USAF ATD
Jim Mazza (US Air Force)
Bonded
Repair of Thick Metal & Complex Structure
Capt William Shipman (US Air Force)
Composites
Manufacturing
Jim Dallam (Cincinnati Machine)
Rotary
Wing Static Balancing
Paul Sampson (GRCI)
Depot
Composite Repairs (Shop Perspectives)
Raymond Dimonda (NADEP Jacksonville)
Ongoing Project Activities
Track 3 – Electronics
Printed
Wiring Board Mfg Tech Center (PMTEC)
Ron Legowik (US Army AMMCOM-Huntsville)
Rapid
Response Computer-Aided Manufacturing for PWBs
Paul Kydd (Parelec)
Rapid
Response Mfg. of PCBs
Upendra Patel (US Army TACOM-ARDEC)
Advanced
Wiring Integrity
Chris Teal (Eclypse International)
Andy Yang (NAVAIR EA-6B FST)
Wafer
Applied Seal for PEM Protection
Peter Black (US Army)
Army Avionics
Jack Van Kirk (US Army, Redstone Arsenal)
Ribbonized,
Organized Integrated Wiring (ROI) System
Roy McMahon (Raytheon Systems Company)
NAVAIR Arc Fault
Circuit Breakers/Wiring
Pall Arnason (Pax River)
Depot
Avionics Challenges
Dempsey Ventress (Warner Robins Air Logistics Center)
Electronic Parts
Obsolescence Initiative
Brandon Lovett (US Air Force)
Advanced
Microcircuit Emulation
James Crabbe (Sarnoff Corporation)
High Density Chip-on-Board
Duane Napp (NCMS)
Viable Combat Avionics
Bruce Long (US Air Force)
Nova Wiring
Integrity System
Mike Mitchell (Honeywell)
Flexible Manufacturing of Microwave
Vacuum Electronic Devices
John Reinhardt (US Army)
Reduced
Oxide Soldering Activation (ROSA) Program
Russ Wagner (Rockwell Collins)
Ongoing Project Activities
Track 4 –
Concurrent Engineering/Best Business
Practices
Rapid Prototyping
Bob Delisle (Pratt & Whitney) and Wayne Knight (Trident
Refit Facility, Kings Bay)
Interactive
Visualization
Bob Andrews (Ethereal Technology)
High Throughput
Production Processing of 5-axis Components
Jim Dallam (Cincinnati Machine)
Condition Based Maintenance
Lewis Watt (RLW Incorporated)
Workflow
Process Automation with Automatic Status Reporting
Mike Fancher (NCMS)
Maintenance
Mentoring Systems
Roger LaPlante (EER Systems)
Simulation Modeling for New Facility Design
Mark Traband (Penn State University)
Custom
Engineered Solutions - Resolving Parts Obsolescence and
Material Sources of Supply
Steven Osburn (US Navy NUWC Keyport)
Proactive
Obsolescence Management - Managing Integrated Circuit
Obsolescence Visibility and Planning
Steven Osburn (US Navy NUWC Keyport)
KCIM
Demo (requires Flash 5.0)
This demo file is an executable file archived using WINZIP. You will
need to download it to your system in order to play it. It will not run
from our server.
Steven Osburn (US Navy NUWC Keyport)
Lean Sustainment Pilot
John Crabill (US Air Force)
Electronic Collaboration
Tony Haynes (NCMS)
e-Learning
Technology Utilization for Enterprise Training and Communication
Ken Johnson (NCMS)
Ongoing Project Activities
Track 5 –
Green Manufacturing
Barstow Air
Pollution Control System
Dr. Paul Chalmer (NCMS)
Automated Paint
Application Containment and Treatment System (APACTS) Process Development
Charles Tricou (Penn State University)
Applications for
Advanced Oxidation Technologies (AOTs) in Waste Treatment
Janice Schneider (Penn State University)
A Shipyard
Program for NPDES (National Discharge Elimination System) Compliance
Janice Schneider (Penn State University)
Leak Testing
Technologies
Chuck Wilkinson (Vacuum Instrument Corporation)
Hydraulic
Fluid Purification
Donald Streeter (US Air Force)
Propulsion
Environmental Working Group and Dry Film Lubricant
Michelle Koogler (PEWG Management Office)
Thermal
Spray Coatings For Hard Chrome Replacement
Bruce Sartwell (NRL)
Navy
Pilot Retrofit Program
Jonathan DeHart (US Navy)
Puradyn Oil Filter
Systems
Kevin Kroger (Puradyn)
New Project Ideas
Workshop 1 – Metals
FlashJet Mobile Manipulator
Depainting System (presentation)
Flashjet Demo (MPG
video - 70MB)
Thomas Cowherd (US Navy NADEP JAX)
Laser
Engineered Net ShapingTM
Dave Keicher (Optomec)
Next Generation
Inspection System Plus
Jeff Calkins (Manufacturing Resources Inc)
Industrial Laser
Applications for Welding
Paul Denny (Edison Welding Institute/Navy Joint Center)
AlumiPlate
Electroplating Process
Linwood Gilman (DLA/DSCR)
Control
of Heat Input and Metal Mass Deposition in Rapid
Manufacturing/Repair Based on Metal Powder Deposition by
Laser Beam
Radovan Kovacevic (Southern Methodist University)
High
Velocity Metal Forming
Glenn Daehn (Ohio State University)
HRT
Laser Precision Metal Deposition
Joshua Rabinovich (H&R Technology)
New Project Ideas
Workshop 2 – Non-Metals
Adaptable
Repair Technologies Based on Agile Composites Manufacturing Processes
Using Laminated Object Manufacturing and Reconfigurable Tooling
Dr. Greg Dillon (Penn State University)
Application
of Nano-Composites to Erosion Resistant Coatings for the V-22
Dr. Greg Dillon (Penn State University)
Machining
of Aluminum Metal Matrix Composites
Mike Gugger (TechSolve)
Composite
Research Projects for Military Applications
Dr. John Gillespie (Univ. of Delaware)
Novel Methods
of Joining Ceramics, Composites, and Dissimilar Materials Using Microwave
Technology
Robert Bruce (FM Technologies)
Direct Part
Marking (DPM)
Peter Ginkel (Telesis Technology)
Inspection and Repair
Preparation Cell
Frank Elliott (GFM)
New Project Ideas
Workshop 3 – Electronics
Depot
Maintenance Technology Needs for Depots
Mike McMillan (US Air Force)
Lead Free
Solder
Duane Napp (NCMS)
Advanced
Spread Spectrum Ultrasonic NDI for Reverse Engineering of Electronic
Circuit Boards
Karl Reichard (Penn State University)
Rapid Response
Computer-Aided Manufacturing for PWBs
Paul Kydd (Parelec)
Future
Technology for Wiring System Integrity
Mike Mitchell (Honeywell)
Economical
Removal and Reapplication of Conformal Coatings
Dempsey Ventress (WR-ALC)
New Project Ideas
Workshop 4 – Concurrent Engineering/Best
Business Practices
Advanced
Industry Practices (Sustainment)
Brench Boden (US Air Force/ManTech)
Lean
Initiative (Sustainment)
John Crabill (US Air Force/ManTech)
Maintenance
Mentoring Systems
Roger LaPlante (EER Systems)
Reconfigurable
Tooling Systems for Repair
Bob Stratton (2Phase Technologies)
Collaborative
Visualization
Bob Andrews (Ethereal Technologies)
Ultra Intelligent
Gas Turbine Engines
Dr. Zane Gastineau (AFRL)
Maintenance
Infotronics for a Closed Loop Design Manufacturing
Jay Lee (Univ. of Wisconsin, Milwaukee)
OptiCAM:
Optical Generation of 3D Models for Computer-Aided Manufacturing
Ali Farsaie (SIS) and Matt Brennan (EDS)
Positron
PIPA Method for Improved NDI
Doug Akers (Positron Systems)
Field
Activity Support and Technology Transfer (FASTT)
Robert Vozzella (US Navy, Portsmouth Naval Shipyard)
General Session - Workshop Reports
Workshop 1 – Metals
Workshop 2 – Non-Metals
Workshop 3 – Electronics
Workshop 4 – Concurrent Engineering/Best
Business Practices
Symposium Wrap-up and
Next Steps
|
